Cover Technology's modular aircraft hangars can be over 80 metres wide, allowing them to accommodate large aircraft with ease.
The fundamental characteristics of Cover Technology hangars are their integral special doors and their excellent wind and snow resistance, meeting the most demanding national and international standards. The AIRCRAFT HANGAR consists of an aluminium and steel frame covered with technical PVC fabric or sandwich panels. The choice of materials allows for low weights and compact volumes, fast assembly and impressive resistance to weather conditions.
The most important feature of the FLIGHT TUBE HANGAR is the shape of both the structure and the door, which allows optimal adaptation to the aircraft to be covered, and the possibility of installing the same hangar in different configurations.
FLIGHT TANGAR structures are of modular design, which means:
CONFIGURATION | |
Width | Minimum 10.00 metres / Maximum 40.00 metres |
Length | Standard modules 05.00 metres / total length infinite |
Side height | Minimum 02.50 metres / Maximum 04.00 metres |
Wind resistance | Minimum 25 m/sec / Maximum 41 m/sec |
Snow resistance | Minimum 60 daN/m² / Maximum 400 daN/m² |
Cover fire resistance class | Self-extinguishing - Flame retardant Class 2 |
Operating temperature | -30 °C / +70 °C |
AEROPLANE HANGAR structures are of modular design, allowing:
MATERIALS | |
Main structure components | Aluminium alloy profiles |
Base plate elements | Hot-dip galvanised steel |
Cover | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Side walls, if required | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Doors or openings, if required | Folding vehicle doors / personnel doors |
Metal cables | Plastic-coated steel cable |
Supporting surface | Plinth not required |
Anchor systems for concrete surfaces | Threaded bars fixed with structural vinyl/epoxy resins |
Anchor systems for firm ground and asphalt surfaces | Steel nails driven into the ground |
Anchor systems for loose ground | Continuous spiral coils or rods |
Apart from the STANDARD PVC sheeting, the cover may be in:
The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the AEROPLANE HANGAR structure are:
The management of unmanned aircraft requires specific hangars with controlled environmental conditions to meet all technical requirements during maintenance. COVER TECHNOLOGY has developed systems, even of large dimensions, suitable to recover several aircraft models, with a smart installation system that, compared to similar buildings made with traditional construction methods, allows a strong reduction in installation time and costs.
UAV HANGAR structures are of modular design, which means:
CONFIGURATION | |
Width | Minimum 10.00 metres / Maximum 40.00 metres |
Length | Standard modules 05.00 metres / total length infinite |
Side height | Minimum 02.50 metres / Maximum 04.00 metres |
Wind resistance | Minimum 25 m/sec / Maximum 41 m/sec |
Snow resistance | Minimum 60 daN/m² / Maximum 400 daN/m² |
Cover fire resistance class | Self-extinguishing - Flame retardant Class 2 |
Operating temperature | -30 °C / +70 °C |
UAV HANGAR structures are of modular design, allowing:
MATERIALS | |
Main structure components | Aluminium alloy profiles |
Base plate elements | Hot-dip galvanised steel |
Cover | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Side walls, if required | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Doors or openings, if required | Folding vehicle doors / personnel doors |
Metal cables | Plastic-coated steel cable |
Supporting surface | Plinth not required |
Anchor systems for concrete surfaces | Threaded bars fixed with structural vinyl/epoxy resins |
Anchor systems for firm ground and asphalt surfaces | Steel nails driven into the ground |
Anchor systems for loose ground | Continuous spiral coils or rods |
Apart from the STANDARD PVC sheeting, the cover may be in:
The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the UAV HANGAR structure are:
The main feature of helicopter hangars is their extremely fast assembly, combined with excellent resistance to wind and snow, thanks to the use of reinforced extruded aluminium profiles. Metal hangars also offer a wide range of technical features that guarantee their durability over time and unsurpassed performance for helicopter storage and maintenance.
The HELIKOPTERHANGAR consists of an aluminium and steel frame covered with technical PVC fabric or sandwich panels. The choice of materials allows for low weights and compact volumes, fast assembly and impressive weather resistance.
The main feature of the HELIKOPTERHANGAR is the shape of both the structure and the door, which allows optimal adaptation to the aircraft to be covered, and the possibility of installing the same hangar in different configurations.
HELICOPTER HANGAR structures are of modular design, allowing:
CONFIGURATION | |
Width | Minimum 10.00 metres / Maximum 40.00 metres |
Length | Standard modules 05.00 metres / total length infinite |
Side height | Minimum 02.50 metres / Maximum 04.00 metres |
Wind resistance | Minimum 25 m/sec / Maximum 41 m/sec |
Snow resistance | Minimum 60 daN/m² / Maximum 400 daN/m² |
Cover fire resistance class | Self-extinguishing - Flame retardant Class 2 |
Operating temperature | -30 °C / +70 °C |
MATERIALS | |
Main structure components | Aluminium alloy profiles |
Base plate elements | Hot-dip galvanised steel |
Cover | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Side walls, if required | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Doors or openings, if required | Folding vehicle doors / personnel doors |
Metal cables | Plastic-coated steel cable |
Supporting surface | Plinth not required |
Anchor systems for concrete surfaces | Threaded bars fixed with structural vinyl/epoxy resins |
Anchor systems for firm ground and asphalt surfaces | Steel nails driven into the ground |
Anchor systems for loose ground | Continuous spiral coils or rods |
The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the HELICOPTER HANGAR structure are:
With a Cover Technology exterior cover, garages can be built quickly and easily to increase performance. Thanks to the wide choice of colours and the availability of customised sizes, modular covers fit perfectly into a wide range of environmental contexts. The GARAGE construction consists of an aluminium and steel frame covered with technical PVC fabric or sandwich panels. The choice of materials allows for low weights and compact volumes, fast assembly and impressive weather resistance. The main feature of the GARAGE structure is the creation of a central area for vehicle maintenance and a series of side areas and containers for functions such as a warehouse, a technical workshop, a management office or toilet facilities.
CONFIGURATION | |
Width | Minimum 10.00 metres / Maximum 40.00 metres |
Length | Standard modules 05.00 metres / total length infinite |
Side height | Minimum 02.50 metres / Maximum 04.00 metres |
Wind resistance | Minimum 25 m/sec / Maximum 41 m/sec |
Snow resistance | Minimum 60 daN/m² / Maximum 400 daN/m² |
Cover fire resistance class | Self-extinguishing - Flame retardant Class 2 |
Operating temperature | -30 °C / +70 °C |
MATERIALS | |
Main structure components | Aluminium alloy profiles |
Base plate elements | Hot-dip galvanised steel |
Cover | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Side walls, if required | Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels |
Doors or openings, if required | Folding vehicle doors / personnel doors |
Metal cables | Plastic-coated steel cable |
Supporting surface | Plinth not required |
Anchor systems for concrete surfaces | Threaded bars fixed with structural vinyl/epoxy resins |
Anchor systems for firm ground and asphalt surfaces | Steel nails driven into the ground |
Anchor systems for loose ground | Continuous spiral coils or rods |
The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the GARAGE structure are: